This module is supposed to be installed between the power supply and the power bus of your Eurorack system. It allows to monitor voltage levels and the current drawn by the subsequent modules. We use these modules in our own racks to continuously monitor power consumption. The monitors have been designed for currents of up to 2 Ampere.
There is a limited number of #sustainableprototypes available on Etsy.
manual
This device was designed to be used with up to 2 Ampere per power line. As it monitors the power load itself it has to be removed from a circuit if it displays currents higher than 2 Ampere.
The Eurorack Power Monitor has one IN and one OUT Eurorack-compatible socket. Make sure to plug the power side into the IN socket and the power bus into the OUT socket.
